Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Insert the power-adapter port into the slot on the palm-rest assembly.
2
Align the screw hole on the power-adapter port with the screw hole on the palm-rest assembly and replace the screw (M2x3) that
secures the power-adapter port to the palm-rest assembly.
3
Connect the power-adapter port cable to the system board.
Post-requisites
Replace the
base
cover.
Replacing the power-adapter port
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the power-adapter port
24
39
Advertisement
Table of Contents
