Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
Procedure
1
Open the latch and disconnect the touchpad cable from the system board.
2
Peel the tapes that secure the touchpad to the keyboard shield.
3
Remove the three screws (M2x2) that secure the touchpad bracket to the palm-rest assembly.
4
Peel off the tapes that secure the touchpad bracket to the palm-rest assembly.
5
Lift the touchpad bracket off the palm-rest assembly.
6
Remove the four screws (M2x2) that secure the touchpad to the palm-rest assembly.
7
Lift the touchpad, along with the cable, off the palm-rest assembly.
56
Removing the touchpad
computer. After working inside your computer, follow the instructions in
Removing the touchpad
www.dell.com/
33
After working inside
Advertisement
Table of Contents
