Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
cover.
2
Remove the
wireless
card.
Procedure
1
Peel off the tape that secures the I/O-board cable to the I/O board.
2
Open the latch and disconnect the I/O-board cable from the I/O board.
3
Disconnect the coin-cell battery cable from the I/O board.
4
Remove the two screws (M2x3) that secure the I/O board to the palm-rest assembly.
5
Lift the I/O board off the palm-rest assembly.
40
Removing the I/O board
computer. After working inside your computer, follow the instructions in
Removing the I/O board
25
After working inside
www.dell.com/
Advertisement
Table of Contents
