Maintenance; Storage - BDS AutoMAB 350 Operating Instructions Manual

Maintenance, storage

Maintenance

WARNING
Danger caused by unqualified repairs!
Unqualified repairs can lead to consid-
erable danger for the user and cause
damage to the machine.
► Repairs to electrical appliances may
only be carried out by the works cus-
tomer service or by specialists trained
by the manufacturer.
Adjusting the machine slide guide
If the machine slide guide (11) exhibits too
much clearance, it must be adjusted. To do
this, proceed as follows:
Loosen the clamping bolts.
‹
Tighten the adjusting screws evenly.
‹
Tighten the clamping bolts again.
‹
Replacing the carbon brushes
Replacement of the carbon brushes may
only be carried out by BDS or by an au-
thorised specialist workshop. Unauthorised
repairs will invalidate the guarantee.
Customer service/service
Should you have any questions on custom-
er service/service, please contact BDS.We
will be happy to give you the address of
your nearest service partner.
18

Storage

If you do not intend to use the machine for
a longer period of time, clean it as de-
scribed in the section "Cleaning". Store
the machine and all its accessories in the
transport case at a dry, clean and frost-free
location.
GB
AutoMAB 350, 450