Table of Contents
Advertisement
GB
Eliminating blockages
WARNING
Danger of cut injuries from broken
tool parts or swarf.
►
Put protective gloves on before start-
ing work.
Blockages caused by a broken tool:
Switch off the machine. Remove plug
‹
from the mains socket.
Use the handle to move the machine
‹
slide to the upper position.
Replace defective tool. Remove swarf.
‹
Other blockages:
Switch the machine off using the mo-
‹
tor switch. Leave the magnetic clamp
switched on.
Use the handle to move the machine
‹
slide to the upper position.
Remove swarf and check tool.
‹
AutoMAB 350, 450
Eliminating blockages, cleaning
WARNING
►
Switch off the machine and pull the
plug out of the mains socket before
starting maintenance and cleaning.
►
When using compressed air for
cleaning, wear protective goggles and
gloves and protect other persons in
the working area.
ATTENTION
►
Never immerse the machine in water
or other liquids.
Remove the inserted tool.
‹
Remove swarf and coolant residues.
‹
Clean the tool and the tool holder on
‹
the machine.
Clean the guide of the machine slide.
‹
Put the machine and accessories into
‹
the transport case.
Cleaning
After each use
17
Advertisement
Table of Contents
