Before Using For The First Time - BDS AutoMAB 350 Operating Instructions Manual

Before using for the first time

Operating lever
(see fig. 2)
9 Hand lever
Pos. 1 Automatic feed
switched on
Pos. 2 Automatic feed
switched off
Manual feed
Scope of supply
AutoMAB 350/450 core drilling ma-
chine
Safety chain
A
ZAK 075 ejector pin
B
ZAK 100 ejector pin
C
Hexagonal offset screwdriver:
D
AutoMAB 350 - Size SW4
AutoMAB 450 - Size SW5
Weldon MK2/19 mm industrial holder
E
(AutoMAB 450 - ZIA 219 KN)
Transport case (not illustrated)
Operating instructions/guarantee card
(not illustrated)
10
Before using for the first time
Transport inspection
As standard, the machine is supplied with
the components indicated in the "Scope of
supply" section.
NOTE
► Check for visible signs of damage or
missing items on delivery. Report an
incomplete or damaged delivery to
your dealer/supplier immediately.
GB
AutoMAB 350, 450