Danfoss VLT HVAC Drive Instruction Manual page 84

6. How to program the adjustable frequency
drive
Function:
Select
ital input.
Select
digital output.
This parameter cannot be adjusted while the
motor is running.
5-02
Value:
Input
Output
6
Function:
Select
ital input.
Select
digital output.
This parameter cannot be adjusted while the
motor is running.
5-12
Value:
Coast Inverse
Function:
Same options and functions as par. 5-1*
ital Inputs
5-13
Value:
Jog
Function:
Same options and functions as par. 5-1*
ital Inputs
84
Input
[0] to define terminal 27 as a dig-
Output
[1] to define terminal 27 as a
Terminal 29 Mode
Input
[0] to define terminal 29 as a dig-
Output
[1] to define terminal 29 as a
Terminal 27 Digital Input
Pulse input
, except for .
Terminal 29 Digital Input
.
MG.11.A4.22 - VLT
VLT
5-14 Terminal 32 Digital Input
Value:
No Operation
Function:
Same options and functions as par. 5-1*
ital Inputs
, except for
5-15 Terminal 33 Digital Input
[0]
Value:
[1]
No Operation
Function:
Same options and functions as par. 5-1*
ital Inputs
.
5-40 Function Relay
Array [8] (Relay 1 [0], Relay 2 [1],
[2]
Value:
Dig-
No Operation
Control Ready
Drive Ready
Drive Ready/Remote
Stand-by/No Warning
Running
Running/No Warning
Run on Ref./No Warning
[14]
Alarm
Alarm or Warning
Dig-
At Torque Limit
Out of Current Range
Below Current, low
Above Current, high
Out of Speed Range
Below Speed, low
® is a registered Danfoss trademark
® HVAC Drive Instruction Manual
[0]
Dig-
Pulse input
.
[0]
Dig-
Relay 7 [6], Relay 8 [7],
Relay 9 [8])
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]