Danfoss VLT HVAC Drive Instruction Manual page 20

3. Mechanical installation
3
Illustration 3.7: Incorrect mounting of screws.
Step 2B: Do not tighten screws completely.
Illustration 3.9: Tightening of screws
Step 4: Tighten the screws completely.
20
Illustration 3.8: Mounting of unit
Step 3: Lift the unit onto the screws.
MG.11.A4.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Instruction Manual