Danfoss VLT HVAC Drive Instruction Manual page 61

VLT ® HVAC Drive Instruction Manual
Data storage in LCP:
1.
2.
3.
4.
All the parameter settings are now stored in the GLCP as indicated by the progress bar. When
100% is reached, press [OK].
The GLCP can now be connected to another adjustable frequency drive, and the parameter set-
tings can be copied to this adjustable frequency drive.
Data transfer from LCP to adjustable frequency drive:
1.
2.
3.
4.
The parameter settings stored in the GLCP are now transferred to the adjustable frequency drive,
as indicated by the progress bar. When 100% is reached, press [OK].
LCP Copy
Go to par. 0-50
Press the [OK] key.
Select "All to LCP"
Press the [OK] key.
LCP Copy
Go to par. 0-50
Press the [OK] key.
Select "All from LCP."
Press the [OK] key.
MG.11.A4.22 - VLT ® is a registered Danfoss trademark
5. How to operate the adjustable frequency
drive
5
61