Identifying The Line Used; Alternating Between Different Lines - Siemens Hicom 300 E User Manual

Making multiline and team calls
Step by Step
S how used line
Service Menu
Additional fu nctio ns?
Sho w used line?
Line 2
Line 1
74 74 74 74

Identifying the line used

If several lines are seized at the same time, you can find
out which line you are conversing on.
With the Show Used Line key configured:
Press the key.
Via the Service Menu:
Press the key. The lamp lights up .
A?
Enter the service code.
or
Select and confirm.
Select and confirm.
The number and status of the line currently in use are
d isplayed.
A display such as "3235 active" means:
the selected line (3235) is being used.

Alternating between different lines

Precondition 1: System Support has specified that
when the user switches between lines, the lines are
p laced on hold and can only be cleared again by replac-
ing the handset or by pressing the Disconnect key.
Precondition 2: You are connected to various other par-
ties on two or more lines. These can be either calling
p arties (Æ page 71) or called parties (Æ page 73).
You are conducting a call on line 1 , for example. The line
key of the p arty on hold flashes slowly.
Press the slowly flashing line key. The first par ty is on
hold on line 1 .
Press the slowly flashing line key. The second party is
on hold on line 2.
You can alternate between the parties as often as you
wish.