Relocating With The Telephone; Disconnecting The Telephone From Its Present Station Line; Reconnecting The Telephone At The New Station Line; Multi-Line And Team Functions - Siemens Hicom 300 E User Manual

Relocating with the telephone

Step by Step
E
Ente r th e code !
E
Ente r th e code !
68 68 68 68
Relocating with the telephone
Check with System Sup port whether this is possible
with your telephone system.
After consulting with System Support, you can log
off your telephone from its present st ation line and then
log it on at the new st ation line. Note that the settings
on your telephone (p rogrammed keys) are not affected
by the move.
Disconnecting the telephone from its
present station line
Enter the code for logging off. If you are not sure of the
code, check with System Support.
E
Enter PIN.
Remove the telephone line cord from the jack.
Reconnecting the telephone at the
new station line
Insert the telephone line cord in the jack.
Enter the code for logging on. If you are not sure of the
code, ask with System Support.
E
Enter PIN.
If you relocate with both a first and a second tele-
phone (for example, executive/secretary configu-
ration), you must first log off from the second
telephone, then the first telephone. At the new
location, you log on the first telephone first, then
the second telephone.

Multi-line and team functions