Forwarding Calls; Using Call Forwarding; Fixed Forwarding - Siemens Hicom 300 E User Manual

Forwarding calls

Step by Step
54 54 54 54
Forwarding calls

Using call forwarding

You can p rogram two types of call forwarding:
• fixed forwarding, and
• variable forwarding
W ith fixed forwarding you can program a forwarding
d estination that will remain valid until you change or de-
lete it. This forward ing function can be switched on and
off.
W ith variable forwarding you can choose between 6 dif-
ferent types of forwarding:
• Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding for busy
• Forwarding after time
• Forwarding for busy/after timeout
Call forwarding is activated when a forwarding destina-
tion is programmed. When the variable forwarding func-
tion is switched off, the forwarding destination is auto-
matically deleted
When forwarding is activated you can see the following
d isplay in the idle menu:
Forwarding type

Fixed forwarding

Variable forwarding
Forwarding for internal/
external
Forwarding for busy
Forwarding after time
Forwarding for busy/af-
ter timeout
Fixed forwarding
If you have programmed a forwarding destination for
fixed forward ing , you can activate and deactivate the
forwarding facility either in the Service Menu or with a
Display message
Forward ing to e.g. 222 Klaus
Meier (own number)
Forward ing is on
No display message
No display message
No display message