Replacing Ambient Fan And Ambient Heater - Hussmann Elite Series Installation & Operation Manual

6-2 s
eRvICe
REPLACING AMBIENT FAN AND
AMBIENT HEATER
1 . Turn off power .
2 . Remove lower front panel .
3 . Remove screws holding motor,
heater, and grille .
4 . Disconnect fan from wiring harness .
5, Disconnect heater from wiring harness .
6 . Assemble new fan/heater assembly: See
Steps A-E this page .
7 . Turn power on .
8 . Verify that motor is working and blade is
turning in the correct direction .
9 . Verify that heater is working .
10 . Replace lower front panel .
D. Attach heater to harness. Insert heater
between fan screws. Insert washers as
shown.
P/N 0453549_M
A. Attach grille to fan as
shown.
Insert
Washers
C. Connect harness to fan as shown.
Insert
Washers
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
Fan Plenum
B. Attach Bracket to Fan
E. Attach heater/fan assembly to fan
plenum.
Insert Spacers
and Screws