Replacing Evaporation Fan - Hussmann microSC GSVM A Series Installation & Operation Manual

5-2
service
REPLACING EVAPORATION PAN
HEATER
For access to these fans:
1 . Remove product and place in a refrigerated
area . Turn off power to the merchandiser .
2 . Make sure there is no voltage in the
refrigerator .
3 . Remove front grille to acess the machine
compartment .
4 . Remove condensing unit screws (Fig . A) .
5 . Slide out the condensing unit (Fig . B) . Be
careful using the condesing unit plate to
pull out the condensing unit . Make sure to
not stress other parts .
6 . Disconnect heater from control box .
7 . Remove heater clips to allow heater to be
removed (Fig . C) .
8 . Change the failed heater .
9 . Reverse the process and make sure
everything is in place .
P/N 3109358_B
REMOVE ELECTRICAL
HEATER FROM BOTH
CLIPS
U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com