Hussmann Elite Series Installation & Operation Manual page 9

P/N 0453549_M
Vertical Adjustment
The position of the front edge of the glass is
vertically adjustable to ensure proper fit . Do
not attempt to make glass adjustments before
leveling the case . All steps of setting, joining
and case leveling are critical to glass position .
Glass alignment may be affected if merchandisers
are not leveled .
Check for level:
1 . In a lineup position, first case is posi-
tioned at the highest point in the floor .
2 . All 8 legs must be adjusted or shimmed to
level case .
3 . Check case level with a 4ft minimum level,
also front to back . Place level on front glass
contact point (top rail) .
Front glass is adjusted from the factory .
However, there may be instances when the
glass may need adjustment in the field .
Joined or with ends
Check that glass is square with the case and
does not interfere with other glass or case
ends .
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
To prevent injury from falling glass during
adjustment, one person must support glass
while a second person makes adjustments.
Adjust all hinge assemblies on each case
at the same time to prevent glass binding
and breakage.
Minimum Space
Minimum Space
3/4-in (20 mm)
3
/ in. (20mm)
4
Elite Service Merchandisers
1-5