Installing Partitions - Hussmann Elite Series Installation & Operation Manual

P/N 0453549_M

INSTALLING PARTITIONS

To join same temperature fixtures on differ-
ent defrost cycles, an acrylic partition kit is
required .
To join unlike fixtures, or like fixtures
operating at different temperatures, a 1 in .
(26 mm) insulated connecting partition kit is
required .
Instructions for installing these partitions are
included with the kits .
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
2.668
TYP
19.327
TYP
7.562
12-Ft 36.717
8-Ft 36.668
6-Ft 24.656
4-Ft 33.125
Notes:
1. All dimensions given in inches.
2. For location of Backups on cases with add-on wedge, start measuring from
the square end of the case opposite the wedge end. Use corresponding case
size dimensions.
3. For location of Backups on 7-Ft cases (facing rear of case)
use 6-Ft case dimensions on the left and 8-Ft case dimensions on the right.
Backup
7.874 7.874
40.193
––
––
––
Elite Service Merchandisers
1-11
7.562
36.717
36.668
24.656
––