Table of Contents
Advertisement
P/N 0453549_M
REMOVING POLYCARBONATE
RAIL LAMP COVERS
The rail covers are removed without tools .
From the front of the case, grasp the cover
with both hands . Apply pressure as shown in
the photo . Pull forward and up as shown in
the photo until the back of the cover clears
the retainer . Reinstall in reverse order .
ELECTRICAL SERVICE RECEPTACLES
The receptacles located on the exterior back of
the merchandisers are intended for scales and
other light duty appliances that are found in
meat and delicatessen departments . The recep-
tacles are not intended for large motors .
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
Scale Stand Receptacle
REPLACING FLUORESCENT LAMPS
Fluorescent lamps are furnished with mois-
ture resistant lamp holders and end caps .
Lamps on lighted shelves have plastic shields .
Whenever a fluorescent lamp is replaced, be
certain to re install the plastic shields and end
caps .
Inspect all lamp sockets and plug–receptacle
connections for signs of arcing . Replace any
component that shows signs of arcing .
Make sure all unused receptacles have their
close-off covers securely attached .
Plastic Shield
Plastic Shield
Fluorescent
Lamp
Fluorescent Lamp Disposal: The United
States Environmental Protection Agency has
information regarding environmentally-safe
fluorescent lamp waste management
programs . On the Net: EPA Web site:
http://www .epa .gov/osw/hazard/wastetypes/
universal/lamps/recycle .htm
Fluorescent lamps contain mercury vapor.
Mercury exposure at high levels can harm
the brain, heart, kidneys, lungs, and immune
system of people of all ages. Do not break
or puncture fluorescent lamps. Dispose of,
or store, all fluorescent lamps in accordance
with Federal (40 CFR 273), State, and local
hazardous waste requirements. Refer to
http://www.epa.gov/mercury/about.htm
Elite Service Merchandisers
6-3
End Cap
End Cap
Hide quick links:
Advertisement
Table of Contents
