Zeiss MCS 600 User Manual page 35

MCS 600
MCS 600 | User Manual
3.8.4 Changing the lamp
The cassette must be opened in order to change the lamp.
Warning
Xenon lamp is sensitive!
The slightest traces of dirt and grease on the glass body of the lamp
can impair the intensity and service life of the lamp. Use dust-free,
grease-free rubber gloves when changing the lamp.
Caution
Xenon lamp is hot!
Allow defective lamps to cool!
How to Implement ...
1. Turn the spectrometer system off and disconnect it from the power supply.
2. Loosen the four fastening screws and pull the lamp cassette out of the
housing.
3. Loosen the six screws on the upper grill plate.
4. Remove the upper grill plate.
5. Loosen the four screws on the rear grill plate and remove the plate.
6. Loosen the locking screw.
7. Remove the lamp chimney from the tubular housing.
8. Remove the defective lamp from the holder and replace it with a new lamp.
5
9. Place the lamp chimney all the way back into the tubular housing and retigh-
ten the locking screw.
10. Reattach the upper and rear grill plates to the lamp cassette housing.
11. Slide the lamp cassette back into the housing and retighten the fastening
screws.
12. You can now reconnect the spectrometer system to the power supply and
turn it on.
1
3
6
2
4
35