Zeiss MCS 600 User Manual page 21

MCS 600
Fig. 6 Changing fuses
MCS 600 | User Manual
3.2.9 Changing fuses
Only use the fuse types specified in the "Specifications" section. Shorting, brid-
ging or the use of temporary fuses is not permitted.
Note
If the fuses blow out frequently, please contact customer service. The
address can be found on page 2 of this document.
1. Turn the device off and disconnect the power plug.
2. Open the fuse drawer
3. Pull the fuse holder(s)
4. Insert the new T2 A/H fuse(s), slide the fuse holder(s) back into place and
close the drawer.
5. Plug in the device again and turn it on.
3.2.10 Spare parts
16
7
15
6
Designation
2 fuses, T2 A/H
.
7
out and remove the defective fuse(s).
16
Cat. no.
000000-0499.204
15
Power plug
6
Drawer
7
Fuse
15
Fuse holders
16
21