Define A Carbon Rod Material - Leica EM ACE600 Operating Manual

Density is the specific weight (g/m3) of the material. Set if degassing is required.
The factor is used for the QSG thickness measurement and calculated from the
specific weight of the material but it can be overwritten.
Set the parameters for the degassing process (power and time).

3.14.4 Define a carbon rod material

Following screens show the parameters which can be set for the material when
editing or defining one.
Set name, an abbreviation if necessary. New materials can always be edited
(true).
Operating Manual Leica EM ACE600 Version 06/15 Page 120