Leica EM ACE600 Operating Manual page 103

For either adding or editing a protocol the following parameters are set:
Tab 'Profile':
1. Set a name for the protocol
2. Option for further description of the protocol
3. Drop down menu to choose the material
Tab 'Geometry':
1. Desired distance of the source to the sample
2. Height of the sample, the stage automatically adjusts to realize the set
source distance
3. Set a tilt, minus is left, plus is right
4. Rotation 1-5, maximum is 20rpm
5. Pressing the pre-set button will move the stage to values, set between 1-4
5
Operating Manual Leica EM ACE600
3
Version 06/15
1
2
1
2
3
4
Page 99