Table of Contents
Advertisement
Programming and Developing Applications
After following the installation instructions in Chapter 2, your board should now be installed and ready
for use.
Programming languages
Measurement Computing's Universal Library™ provides access to board functions from a variety of
Windows programming languages. If you are planning to write programs, or would like to run the
example programs for Visual Basic
Guide (available on our web site at www.mccdaq.com/PDFmanuals/sm-ul-user-guide.pdf).
Packaged applications programs
Many packaged application programs, such as SoftWIRE
have drivers for your board. If the package you own does not have drivers for your board, please fax or e-
mail the package name and the revision number from the install disks. We will research the package for
you and advise how to obtain drivers.
Some application drivers are included with the Universal Library package, but not with the application
package. If you have purchased an application package directly from the software vendor, you may need
to purchase our Universal Library and drivers. Please contact us by phone, fax or e-mail:
Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
Fax: 508-946-9500 to the attention of Tech Support
Email:
techsupport@measurementcomputing.com
Register-level programming
You should use the Universal Library or one of the packaged application programs mentioned above to
control your board. Only experienced programmers should try register-level programming.
If you need to program at the register level in your application, refer to the Register Map for the PCI-
DIO48H and PCI-DIO96H. This document is available at
DIOxxH.pdf.
or any other language, please refer to the Universal Library User's
, Labtech Notebook™, and HP-VEE™, now
www.mccdaq.com/registermaps/RegMapPCI-
3-1
Chapter 3
Advertisement
Table of Contents
Need help?
Do you have a question about the PCI-DIO48H and is the answer not in the manual?
Questions and answers