Hot Water Dispensing Spout - LAVAZZA LB2317 Operation And Maintenance

Fill the water tank again up to the MAX level with fresh
drinking water. The following screen is displayed:
Place a container under the hot water dispensing spout.
The filter activates. The following screen is displayed:
Press the "OK" button to pause the operation. Once the
operation is complete the machine exits the menu. Fill the
water tank again up to the MAX level with fresh drinking
water. The 100% AquaClean icon appears on the
machine-ready screen to indicate that the filter has been
installed.
7.3.2 Replacing the AquaClean
Filter
Replace the AquaClean
filter as soon as its capacity
drops to 0% and the filter
icon blinks quickly.
Replace the AquaClean filter
at least each 3 months, even
if the machine is yet to
inform you that it needs to
be replaced.
Remove the AquaClean filter. Follow the steps described
under "Preparing and Installing the AquaClean Filter". The
operations relating to the descaling phase are not
requested. You just need to replace the filter and activate
the new one. The display automatically updates the
number of filters used. Fill the water tank again up to the
MAX level with fresh drinking water.
Replacing the Filter after Using 8 Filters
Remove the AquaClean filter. Follow the steps described
under "Preparing and Installing the AquaClean Filter". All
operations relating to the descaling phase are requested as
well. The display automatically updates the number of
filters used. Fill the water tank again up to the MAX level
with fresh drinking water.
7.3.3 Removing the "AquaClean"
Filter
If the filter is installed in the machine and you want to
remove it, follow the steps below.
Remove the AquaClean filter. Descale the machine as
described in section "Descaling". You do not need to
remove the small white filter, since it was removed
previously. Once descaled, the machine requests to press
a button.
English
29