LAVAZZA LB2317 Operation And Maintenance page 52

English
MENU ITEM
Stand-by Time
Safety
.
Technical Menu Password
Set
Confirm Password
Disable
Change
Service Menu Password
52
Description
This function allows you to adjust the time after which the machine must go into the "stand-by" mode. In case
it is not used:
- NO STANDBY:
the machine is always active
- 30 MIN:
the machine goes into the standby mode after 30 minutes of inactivity
- 60 MIN:
the machine goes into the standby mode after 60 minutes of inactivity
- 180 MIN:
the machine goes into the standby mode after 180 minutes of inactivity
Press the OK button on the EXIT option to go back to the top level
This function allows to manage the passwords used to access machine menus:
- Technical Menu Password
- Service Menu Password
- User Menu Password
By means of this option the user can manage the password of the technical menu:
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
this option is only displayed if a password is already set
Press the OK button on the EXIT option to go back to the top level
This function allows to set the 4-digit code to access the technical menu.
The user must set the desired number, increasing or decreasing it by means of the navigation
buttons.
By pressing the OK button the cursor under the digit is moved towards right.
By pressing the OK button, after the fourth digit you access the screen "Confirm Password".
Press the OK button on the EXIT option to go back to the top level
Press OK on one of the following options:
- YES:
confirming and saving the set password
- None:
going back to the password entering screen
Press the OK button on the EXIT option to go back to the top level
By means of this option the user can disable the set password.
In this case the password is set to "0000" by default.
By means of this option the user can change the set password.
By means of this option the user can manage the password of the maintenance menu
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
this option is only displayed if a password is already set
Press the OK button on the EXIT option to go back to the top level