LAVAZZA LB2317 Operation And Maintenance page 43

MENU ITEM
Brita Filter
Descale Before Activating Filter
Activate Brita Filter?
Insert Filter Fill Water
Tank
Place Container Under the
Water Spout
Description
This function allows you to manage installation and maintenance of the Brita filter.
Available options depend on the presence of an already installed filter.
In case the Brita or Aquaclean filters are installed:
- OFF:
keeps the Brita filter status unchanged
- ON:
allows to start the activation procedure of the Brita filter and goes to the "Activate Brita
Filter?" screen
- EXIT:
goes back to the "Brita Filter" screen
In case a Brita filter is already active and has not been used up:
- OFF:
allows to deactivate the Brita filter
- EXIT:
goes back to the "Brita Filter" screen
In case a Brita filter is already active but has been used up:
- OFF:
allows to deactivate the Brita filter
- RESET:
allows to install a new Brita filter and goes to the "Activate Brita Filter?" screen
- EXIT:
goes back to the "Brita Filter" screen
In case an AquaClean filter is already active, the screen "Descale Before Activating Filter"
is shown
This screen is shown for 3 seconds and then it automatically goes to the "Brita Filter" page
Confirmation to proceed is requested with the activation of the Brita filter:
- YES:
the filter activation procedure starts
- None:
goes back to the "Water Filters Management" page
A preliminary instruction is provided when activating the filter:
- OK:
go to the next step
- EXIT:
goes back to the "Water Filters Management" page
A preliminary instruction is provided when activating the filter:
- OK:
filter activation start
- EXIT:
goes back to the "Water Filters Management" page
English
43