LAVAZZA LB2317 Operation And Maintenance page 25

Measuring water hardness
is very important in order
to correctly manage the
anti-scale filter and the
frequency with which the
machine must be descaled.
Descale the
before using
AquaClean filter.
In case you did not activate
the filter upon first use and
you already prepared more
than 50 cups (with 100-ml
capacity), descale
machine before activating
the filter.
Replace the AquaClean
filter as soon as its capacity
drops to 0% and the filter
icon blinks quickly. Replace
the AquaClean filter at
least each 3 months, even
if the machine is yet to
inform you that it needs to
be replaced.
We recommend to buy a
new filter when its capacity
drops to 10% and the filter
icon starts blinking slowly.
In this way you can replace
the filter when its capacity
drops at 0%.
machine The anti-scale filter should
the be
indicated by the machine.
Before descaling, remove
the anti-scale filter from
the water tank.
7.3.1
You can install the AquaClean filter when first installing the
the
machine as part of the overall installation procedure. If you
did not install the AquaClean filter upon first use, you can
install it later by accessing the menu as described here
below. Remove the AquaClean filter from its packaging.
Shake it for about 5 seconds. Immerse the AquaClean
filter upside down in a carafe full of cold water and wait
for the air bubbles to come out.
Switch to machine programming mode as described in
section "Access to the Maintenance Menu". Scroll the
menu until you reach the "Water filters management"
option.
replaced whenever
Preparing and Installing the
AquaClean Filter
English
25