LAVAZZA LB2317 Operation And Maintenance page 53

MENU ITEM
Set
Confirm Password
Disable
Change
User Menu Password
Set
Confirm Password
Disable
Change
Exit
Restore Factory Settings
Read from USB
Description
This function allows to set the 4-digit code to access the maintenance menu
The user must set the desired number, increasing or decreasing it by means of the
navigation buttons.
By pressing the OK button the cursor under the digit is moved towards right.
By pressing the OK button, after the fourth digit you access the screen "Confirm
Password".
Press the OK button on the EXIT option to go back to the top level
Press OK on one of the following options:
- YES:
confirming and saving the set password
- None:
going back to the password entering screen
Press the OK button on the EXIT option to go back to the top level
By means of this option the user can disable the set password.
In this case the password is set to "0000" by default.
By means of this option the user can change the set password.
By means of this option the user can manage the password of the user menu:
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
this option is only displayed if a password is already set
Press the OK button on the EXIT option to go back to the top level
This function allows to set the 4-digit code to access the user menu
The user must set the desired number, increasing or decreasing it by means of the navigation
buttons.
By pressing the OK button the cursor under the digit is moved towards right.
By pressing the OK button, after the fourth digit you access the screen "Confirm Password".
Press the OK button on the EXIT option to go back to the top level
Press OK on one of the following options:
- YES:
confirming and saving the set password
- None:
going back to the password entering screen
Press the OK button on the EXIT option to go back to the top level
By means of this option the user can disable the set password.
In this case the password is set to "0000" by default.
By means of this option the user can change the set password.
Through this option the user can go back to the menu top level
This function resets the factory configuration settings when a malfunction occurs.
By means of the OK button the user can confirm this choice.
This function allows to read and import onto the machine a parameter configuration.
During this operation the display shows a screen with the message "PLEASE WAIT".
In case of a negative result, the display shows a red screen with detailed information
regarding the error
English
53