Creating A Cooking Program - Henny Penny FlexFusion PLATINUM COMBI Operation Manual

5.9.1 Creating a cooking program

Requirement Manual cooking menu open
INFORMATION
Creating a cooking program step
1. Tap the field for the desired cooking mode.
The first step of the cooking program is created.
The display for the cooking program step shows "Step 1 of 1".
2. Modify the desired settings for the first step.
The first step of the cooking program has been created.
Adding cooking program steps
3. A wiping gesture upward opens the next page.
The next page is displayed.
4. Tap the field for "Add step on the left".
or
5. the field for "Add step on the right".
The "New step" window opens.
6. Select the cooking mode or function in the window by tapping it.
The display of the cooking program step in the window shows
the current position of the new step in the cooking program.
7. Modify the settings for the step.
The new step is added.
Deleting a cooking program step
If a cooking program has only one step, it cannot be deleted. The function is
not active.
8. Select the step.
9. A wiping gesture upward opens the next page.
The next page for the step is displayed.
10.Tap the "Delete step" field.
The Delete window is displayed.
Operating instructions
Operating the unit
69