Henny Penny FlexFusion PLATINUM COMBI Operation Manual page 34

Operating the unit
34
Stand-by mode
To set the stand-by mode, deactivate the operating lock.
If stand-by mode is activated, the touchscreen goes dark after the set
time. The cooking zone light is switched off.
Setting the background lighting
This setting reduces the brightness of the touchscreen.
CombiDoctor
CombiDoctor uses a selectable self-diagnostic program to check the
components for climate control and cleaning.
Delete user's own cooking programs
Delete all the cooking programs created by the user.
Set the units
Set the units for temperature and liquid quantities.
The possibilities for temperature are °C and °F.
The possibilities for volume are ml, fl.oz (Imp.) and fl.oz (US)
Display the fault memory
Call up stored faults for forwarding to Service partners.
Import HansDampf programs
Import existing HansDampf programs.
Importing manufacturer's cookbook
Import the cookbooks provided by the manufacturer.
Select cookbook
Select the cookbooks typical of the country.
Cookbook lock
Lock function for the cooking programs in autoChef.
Setting Function
Unlocked Deleting, changing and overwriting the cooking programs is
possible
Locked Changes in the cooking steps, for example temperature
increases, are possible. The preset values apply again, when
the cooking program is next called up.
Fully locked The cooking program can only be used in the way it has
been stored. Changes in the cooking steps are not possible.
Export log data
Export of log data for forwarding to the service technician.
Load OEM settings
Special settings can be loaded.
Operating instructions