Retrieving Equipment Information; Setting The Date And Time - Henny Penny FlexFusion PLATINUM COMBI Operation Manual

5.5.3 Retrieving equipment information

INFORMATION
Requirement The Setting menu is displayed

5.5.4 Setting the date and time

INFORMATION
Requirements The Settings menu is displayed
Eco display On or Off
Set the Eco display function.
Select signal tones
Selection of one of the four possible signal tones.
Software update
Update of the software via a USB flash drive.
Import additional content
Import of additional content via a USB flash drive.
The equipment information contains details about the software and hardware
version, the serial number of the unit and contact details.
Tap the "Equipment information" field.
The Equipment information window is displayed.
Equipment information can now be read.
Observe the displayed date and time format carefully. If values are invalid, the
entry is not accepted.
1. Tap the "Set date and time" field.
The Settings window opens.
The keypad opens.
2. Enter the date and time.
3. Tap the Confirm button.
The keypad closes.
The date and time are set.
Operating instructions
Operating the unit
35