Connecting To Protocessor Web Configurator; Figure 8: Web App Splash Page; Figure 9: Login Window - SMC Networks ProtoCessor FPC-ED2 Startup Manual

5.2

Connecting to ProtoCessor Web Configurator

After setting a local PC on the same subnet as the ProtoCessor (Section 5.1), open a web browser on
the PC and enter the IP Address of the ProtoCessor; the default address is 192.168.1.24.
NOTE: If the IP Address of the ProtoCessor has been changed by previous configuration, the assigned
IP Address can be discovered using the FS Toolbox utility. See
•
Once at the Web App splash page, click the Login button.
•
Enter the previously set up or default username and password.
NOTE: The default username is "admin". The default password is "admin".
Leonard Valve ProtoCessor Start-up Guide

Figure 8: Web App Splash Page

Figure 9: Login Window

Page 12 of 32
Appendix A.1 for instructions.