Page 1
Pulse Valve Valve for Dust Collector RoHS Life: million cycles or more/ ∗ times or more ∗ High peak pressure and low air consumption ∗ ∗ increase reduction Peak pressure Air consumption ∗1 Based on SMC’s specific testing conditions (JSXFA-06, Pilot valve orifice is ø5 mm or larger) Compression fitting type ∗2 Comparison with SMC existing model New model:...
Pulse Valve JSXFA Valve for Dust Collector Series ∗ Long service life: million cycles or more Pilot port 1/8, 1/4 (Rc, NPT, G) Spring is not necessary due to high strength elastomer diaphragm. ∗ Value based on the test conditions of SMC (3/4 inch, 20A) (except the made-to-order “A”) OFF response time: ∗...
Page 3
Pulse Valve JSXFA Valve for Dust Collector Series Application of the pulse valve Header tank Pulse Valve Filter Remove fine particles using the pulse valve! Mixing Cutting Pressing (Blanking / Piercing) Pulse blow for various industries! General production line Agriculture / Steel and cement livestock Food...
Page 4
Pulse Valve Valve for Dust Collector JSXFA Series RoHS How to Order JSXFA 06 R Compression Direct piping type fitting type Piping IN/OUT port size Thread type Compression fitting type * 3/4 (20A) Direct piping type 1 (25A) 1 1/2 (40A) *1 Seals and washers are included.
Page 5
JSXFA Series Pulse Valve Valve for Dust Collector Construction JSXFAE/Compression Fitting Type Port size: 06, 10 sizes Port size: 14 size u y t Component Parts Component Parts Description Material Description Material No. Description Material Body Body Seal Main valve Resin Main valve Resin...
Page 6
JSXFA Series Dimensions: JSXFAE/Compression Fitting Type Port size: 06, 10 sizes Pilot port 1/8, 1/4 (Rc, NPT, G) Port size Port size: 14 size (≈52) Silencer (Option) Pilot port 1/8, 1/4 (Rc, NPT, G) Exhaust port Port size Dimension in ( ) shows the dimension after tightening. Dimensions [mm] Port size...
Page 7
JSXFA Series Pulse Valve Valve for Dust Collector Dimensions: JSXFAF/Direct Piping Type Port size: 06, 10 sizes Pilot port Pilot port 1/8, 1/4 (Rc, NPT, G) 1/8, 1/4 (Rc, NPT, G) Port size Port size Port size: 14 size (≈52) (≈52) Silencer Silencer...
Page 8
JSXFA Series Working Principle Port size: 06, 10 sizes Port size: 14 size De-energized De-energized The air enters from the IN side The air enters from the IN goes through the supply orifice of side goes through the supply Pilot valve the main valve and sub-valve to orifice of the main valve to fill Pilot valve...
Page 9
JSXFA Series Pulse Valve Valve for Dust Collector Replacement Parts Replacement part number Model Main valve assembly Sub-valve assembly Silencer (Main valve + O-ring) (Sub-valve + O-ring) JSXFA(E, F)-06-B- JSXF-06B-KT — — JSXFA(E, F)-06-B-A JSXF-06B-A-KT — — JSXFA(E, F)-10-B- JSXF-10B-KT —...
Page 10
VXFC Series Dedicated Controller for Operation / VXFC Series How to Order Controller [Application example] VXFC 06 Pulse valve (JSXFA) Blow tube Nozzle 2-port solenoid valve Number of Voltage output points 24 to 48 VDC Clean air outlet 6 output points 12 VDC 10 output points 85 to 240 VAC...
Page 11
VXFC Series Dedicated Controller for Operation Dimensions Digital switch for setting OFF time DIP switch for setting cascade Digital switch for setting ON time DIP switch for setting two-time hitting Rotary switch for setting output Terminal block for cascade connection OUT1 OUT2 0.01 to 0.99...
JSXFA Series Specific Product Precautions 1 Be sure to read this before handling the products. Refer to the back cover for safety instruc- tions. For 2-port solenoid valve for fluid control precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual” on the SMC website: https://www.smcworld.com Design Selection Warning...
Page 13
JSXFA Series Specific Product Precautions 2 Be sure to read this before handling the products. Refer to the back cover for safety instruc- tions. For 2-port solenoid valve for fluid control precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual” on the SMC website: https://www.smcworld.com Mounting Piping Warning...
Page 14
JSXFA Series Specific Product Precautions 3 Be sure to read this before handling the products. Refer to the back cover for safety instruc- tions. For 2-port solenoid valve for fluid control precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual” on the SMC website: https://www.smcworld.com Operating Environment Appearance Warning...
These safety instructions are intended to prevent hazardous situations and/or Safety Instructions equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for ∗1) safety and must be followed in addition to International Standards (ISO/IEC) and other safety regulations.
Need help?
Do you have a question about the JSXFA Series and is the answer not in the manual?
Questions and answers