Odroid-Vushell For Odroid-Vu7 - Hardkernnel ODROID-C2 User Manual

the relevant components:
$ sudo apt-get remove mali-x11
$ sudo apt-get install qt5-default libqt5serialport5-dev libusb-
1.0-0-dev
$ sudo apt download mali-x11
$ sudo dpkg -i --force-overwrite mali-x11*.deb
$ sudo apt-get install xserver-xorg-video-mali
$ sudo ldconfig
commands:
$ cd ~
$ git clone https://github.com/ganzziani/xscopes-qt
$ cd xscopes-qt
$ qmake
$ make -j5
ous page, launch the application using the following command:
$ sudo ./xscope
bit.ly/22xfjzn
Xprotolab Plain data acquisition

ODROID-VuShell for ODROID-VU7

VU7 and ODROID-VU7 Plus. With the use of the ODROID-C2, you
can create your own desktop PCl. Its design allows for two different
viewing angles. The components of the VuShell are shown here.
ly/2b8lk6a
Android, is shown next.
88
ODROID C2 USER MANUAL
Then, install the open-source application using the following
After connecting the cable as shown in the image on the previ-
Usage details for the Xprotolab Plain can be found at
.
The VuShell is a laser-cut acrylic enclosure for the ODROID-
Detailed assembly instructions can be found at
. The assembled VuShell housing an ODROID-C2 running
Chapter 4
http://
http://bit.