Hardkernnel ODROID-C2 User Manual page 29

Preparing the eMMC module
scend USB3 microSD card reader / writer model. The alignment may
be different with your own microSD USB adapter. Next, ensure that
the computer you are about to use to flash the image, has a function-
ing connection to the Internet. Now that you have the USB SD card
reader / writer with the boot media inserted, attach the male USB end
of the USB SD card reader / writer to the appropriate (USB3 or USB2)
female port on the computer/USB3-hub.
models of microSD cards. However, you can still use any brand or
speed of memory card as storage. Sandisk Class 10 or UHS-1 cards
are working well with ODROID-C2, and below is a list of the memory
cards that have been tested:
Fully compatible microSD cards
• SanDisk microSDHC Memory Card
• SanDisk Ultra microSDHC/microSDXC UHS-I Memory Card
• Samsung SDXC EVO Memory Card
• Toshiba Exceria Memory Card
Partially compatible microSD cards
ODROID-C2, but instead take about 30 seconds to start the boot up
process. Once the boot processing is done, and the operating system
is running, they perform normally:
• Transcend microSDXC Class 10 UHS-I 300x (Premium)
24
ODROID C2 USER MANUAL
The above image shows the alignment when using the Tran-
The ODROID-C2 may not be able to boot immediately with some
The following cards may not be able to boot immediately on
Chapter 2