Hardkernnel ODROID-C2 User Manual page 10

5V DC 2A PSU
the 2-pin PSU into the power outlet. You may need an adapter to use
in your region - such as the Americas. The PSU pictured is available
from Hardkernel.
USB DC plug cable
vice that can generate 2A @5V, and attach the plug to the ODROID-C2.
This cable is also available from Hardkernel.
DC plug cable
plug, you can cut off the plug from such a power supply. Expose about
½" of the red/black wires on the psu cable and attach them to the same
colored cables of this cable, then solder the joints. You can cover the
joint using electrical tape or a heat-shrink wrap. Attach the plug to the
ODROID-C2 and insert the PSU pins into a power outlet.
with the bench power supplies with variable voltage.
5
ODROID C2 USER MANUAL
Attach the plug to the power connector on the ODROID-C2. Plug
Attach the USB end of this cable to the USB port of a charging de-
If you have a 5V DC 2A PSU which does not have the required
This cable is also available from Hardkernel, and may be paired
Chapter 1