Hardkernnel ODROID-C2 User Manual page 68

and prevent possible device damage.
above illustrates the GPIO pin numbering translation scheme used in
the WiringPi library.
Tinkering project example
and the kit. Details can be found in the related wiki at
2ba6h8o
the image above, or a simplified version using fewer LEDs that reacts
to the same stimuli (light sensor being covered) as shown below.
Tinkering project example
the WiringPi library by running the following commands in a Terminal
window:
$ cd ~
$ git clone https://github.com/hardkernel/WiringPi
$ cd WiringPi
$ ./build
63
ODROID C2 USER MANUAL
The WiringPi library has been ported to work with C2. The chart
The image above is a project example using the ODROID-C2
You can wire up your project to reflect the example show in
Prior to trying out the example, you will need to build and install
Chapter 4
http://bit.ly/