Power Supply - Hardkernnel ODROID-C2 User Manual

monitor supporting 1024x600 pixel resolution and 10-point touch con-
trol. The USB cable that provides power and touch related control
signals.
ODROID-VU7 Plus HDMI Monitor
ODROID-C2. It is useful to experiment with circuit design and related
software monitoring and control, which is detailed in Chapter 4.
C Tinkering kit for ODROID-C2

Power Supply

dedicated power connector (miniature barrel jack) can accept a DC plug
cable with a plug that has an outer diameter of 2.5mm and an inner
diameter of 0.8mm. The plug inner core (center) is positive (attached
to the RED wire in the cable) and outer cylinder is negative (attached
to BLACK wire in the cable). The ODROID-C2 can be powered using
different options, which are outlined below.
4
ODROID C2 USER MANUAL
Below is shown the 7" ODROID-VU7 Plus HDMI touchscreen
The image below depicts the use of the C Tinkering kit with an
The ODROID-C2 board requires a 5V/2A DC power source. The
Chapter 1