Oduino One - Hardkernnel ODROID-C2 User Manual

ple-led.c from the previously mentioned Wiki, to a working directory
such as tkit-example, then build and run it using the following com-
mands:
$ cd ~ && mkdir tkit-example/ && cd tkit-example/
$ gcc -o example-led example-led.c -lWiringPi -lWiringPiDev -lp-
thread
$ sudo ./example-led
finger closer to the light sensor and you should see the LEDs light up.

ODUINO ONE

cludes the following components, all packaged into one experimenta-
tion unit.
The ODUINO ONE unit
• Arduino Uno R3
• 16x2 LCD display
• DHT11 one-wire humidity / Temperature sensor
• keypad (four directional keys)
Std A/Std B cable. Connect the cable to the ODUINO ONE and the
C2. The ONE goes through the power-up process and displays the
ambient humidity and temperature. It can also display the key that
gets clicked on the keypad. Some additional information on the ONE
package can be obtained using the following commands:
64
ODROID C2 USER MANUAL
Then, download the C-language sample source code exam-
Note that GPIO access requires root user privilege. Move your
The ODROID-compatible Arduino called the ODUINO ONE in-
The ONE package can be powered by the C2 using the USB
Chapter 4