Hardkernnel ODROID-C2 User Manual page 77

USB-SPDIF kit
ODROID-C2's USB port to the other end, then reboot the system. You
can check to see if the device is detected using the following commands:
$ lsusb
...
Bus 001 Device 005: ID 0d8c:013c C-Media Electronics, Inc.
Audio Controller
...
$ sudo lsusb -D /dev/bus/usb/001/005
[sudo] password for odroid:
Device: ID 0d8c:013c C-Media Electronics, Inc.
troller
Device Descriptor:
bLength
bDescriptorType
bcdUSB
bDeviceClass
bDeviceSubClass
bDeviceProtocol
bMaxPacketSize0
idVendor
idProduct
bcdDevice
iManufacturer
iProduct
iSerial
bNumConfigurations
...
configure it by launching the PulseAudio Volume Control configuration
option from the desktop. Then, in the Configuration tab, select the
Digital Stereo Output profile, select the Output Devices tab and update
the configuration for the CM108 device as shown in the image below.
Note that TrueHD or DTS-MA pass-through is unsupported.
72
ODROID C2 USER MANUAL
Attach the cable provided in the kit to one end of the device, and the
0x0d8c C-Media Electronics, Inc.
0x013c CM108 Audio Controller
Now that the device is verified to be recognized by the system,
Connect a TOSLINK optical cable to the SPDIF peripheral and
USB-SPDIF device internals
18
1
1.10
0 (Defined at Interface level)
0
0
8
1.00
1 C-Media Electronics Inc.
2 USB PnP Sound Device
0
1
Chapter 4
CM108
CM108 Audio Con-