Hardkernnel ODROID-C2 User Manual page 22

Chapter 1
• Compatible 5V/2A power supply
• HDMI monitor for output device, HDMI Cable and micro-USB cable
for touch
• Keyboard and Mouse for input device
• MicroSD card for the operating system and user data (8GB or higher is
required)
• MicroSD card reader to install the operating system image
• Ethernet cable
The following additional peripherals are highly recommended:
• An eMMC module instead of the microSD card due to much higher I/O
speed
• USB-UART module kit to debug issues that may prevent proper func-
tioning of the unit
I am a platform/OS developer. What should I buy with ODROID-C2?
Along with those listed earlier, you should also obtain a micro-USB
cable for fastboot and ADB interface.
I have a USB-Serial converter. Should I buy your USB-UART mod-
ule kit?
We strongly recommend using our USB-UART module kit because it
includes the proper connector and is voltage matched to work with the
ODROID-C2.
How do I access the Internet with an ODROID-C2?
Use a 10/100/1000 LAN Ethernet connection, or purchase the WiFi
module kit for a wireless connection.
What display can I use?
There is an HDMI Type-A port on the ODROID-C2. Below is a list of
resolutions that are currently supported:
• 3804x2160 (UHD/4K)
• 1920x1200 (WUXGA)
• 1920x1080 (1080p)
• 1280x720 (720p)
• 720x480 (480p)
• 720x576 (576p)
• 1360x768 (768p WXGA)
• 1280x800 (800p WXGA)
• 1280x1024 (SXGA)
17
ODROID C2 USER MANUAL