Hifi Shield - Hardkernnel ODROID-C2 User Manual

Wireless Adapter
...
$ sudo lsusb -D /dev/bus/usb/001/014
[sudo] password for odroid:
Device: ID 148f:5572 Ralink Technology, Corp.
Adapter
Device Descriptor:
bLength
bDescriptorType
bcdUSB
bDeviceClass
bDeviceSubClass
bDeviceProtocol
bMaxPacketSize0
idVendor
idProduct
bcdDevice
iManufacturer
iProduct
iSerial
bNumConfigurations
...
the up-down arrow icon on the top right as shown in the image below.
You will first be presented with the option to enable WiFi.
ent the various networks that can be accessed. Select your WiFi net-
work, and you will be presented with a login window. Enter the pass-
word and click the Connect button. In a few moments, you should be
connected to the network. You can then run the ifconfig command
to obtain connection details, such as IP address and packets trans-
ferred. Other WiFi modules offered by Hardkernel can be used using
the same steps listed above.
WiFi configuration

HiFi Shield+

tion guide available at
and power-up, run the following commands to let the system detect
the new shield labeled ODROIDDAC, along with the details of the
83
ODROID C2 USER MANUAL
18
2.00
64
0x148f Ralink Technology, Corp.
0x5572 RT5572 Wireless Adapter
1.01
1
The module can be configured to use your WiFi network. Click
Enable the WiFi adapter, and it will automatically scan and pres-
To use the HiFi Shield+, follow the installation and configura-
1
0 (Defined at Interface level)
0
0
1 Ralink
2 802.11 n WLAN
3 1.0
http://bit.ly/2brrGdG
Chapter 4
RT5572 Wireless
. After installation