Myahrs+ Board - Hardkernnel ODROID-C2 User Manual

Install gpsd and relevant utilities using the following command:
$ sudo apt-get install gpsd gpsd-clients foxtrotgps
then reboot:
$ sudo dpkg-reconfigure gpsd
the following command:
$ foxtrotgps
Foxtrotgps display
ence of a working Internet connection and clear exposure to blue sky
for GPS signals. If you wish to see a real-time map while you are driv-
ing in a vehicle with this setup, you will need to use your smartphone
as a hot-spot and have the ODROID communicate with it via WiFi.

myAHRS+ board

(AHRS), less influenced by acceleration and magnetic disturbances,
the low cost USB2-based myAHRS+ board offered by Hardkernel is a
great choice. It also offers an I2C interface, which is useful in an em-
bedded application like Arduino-based projects.
• triple axis 16-bit gyroscope : ± 2000 dps
• triple axis 16-bit accelerometer : ± 16 g
• triple axis 13-bit magnetometer : ± 1200 µT
80
ODROID C2 USER MANUAL
Then, configure gpsd using the following command and options,
From a terminal window, launch the foxtrotgps application using
Note that the display of a live map, as shown, requires the pres-
If you are looking for an Attitude Heading Reference System
It includes three sensors:
Chapter 4