Page Description Of Main Page - Digital Dream DM500 User Manual

4.3 Main Page Description

4.3.1 Page description of Main Page

1
10
11
Press the key
The Page discription:
1. Coordinate display: Here you can see the absolute coordinate and mechanical coordinate;
2. FRO: FRO controls the Feed Speed. The range is 0%-300%,"+%" and "-%" adjust the speed in 10%
increments;
3. SJR: SJR controls the jogging of the machine;
When in Cont Mode, "+%" and "-%" can adjust the speed in 10% increments;
When in Step Mode, "+%" and "-%" can change from 0.01mm to 0.1mm to 1mm and to 10mm;
4. F: F is the Feeding Speed.It shows the current machining speed;It shows the fixed feeding speed;
5. S: S is the spindle speed.It shows the current spindle speed;It also display the spindle status of
STOP/START;
6. Current workpiece Coordination: G54/G55/G56/G57/G58/G59 workpiece coordination;Mach Coordi-
nation;
7. Manually High/low speed;
8. Output signal status;
9. Input signal status;
10. Version information and Programming date;
11. Machining information: G code information when automatically machining;Errors.
,the Screen goes to Main Page.
Page -16
2
3
4
5
6 7
8
9
DM500 User's Manual