Brief Description Of The Uc300 Motion Controller - Digital Dream UC300 User Manual

1. Brief Description of the UC300 Motion Controller:

For firstly of all we thank you for your interesting in our product and for reading this user's guide.
The UC300 is a high-performace external motion controller for Mach3, with USB port communicated
Mach 3 software,supporting standard MPG and Digital Dream MPG.The device can communicate with a
connection to a control computer's network.The network connection can be built with direct connection by USB
Port.
The computer connects to the UC300 via a standard USB cable.It's the best to shiled the communication
USB cable to ignore the interferences.
The device can be used to control machine tools with stepper or servo motor with pulse and direction
interface;the controller can output a maximum of 300kHz stepping frequency for each axes and can work with
upto 6-axes.The Controller is 3-6 Axis for user's options.
This user's guide describes how to establish connection between the device and controler computer,the
device and stepper/Servo drives and spindle motor,how to setup the network and the device for the communica-
tion.This document also describes the inputs and outputs,the electrical parameters and properties of the motion
controller.It guides the users how to run the device with Mach3 software,and how to set the parameters in the
software.
Here is the brief description for the device:
1) Motion control 3-6 Axis(X,Y,Z,A,B,C) for option,max frequency output 300Khz/Axis;
2) USB Communication with Mach 3 Software;
3) Main power supply 24VDC,Current should higher than 1A;
4) IO Power is 24VDC power supply input,current should higher than 1A(The controller already supply the
power for IO port,no need the external power supply for IO port anymore);
5) 12 opto-isolated digital input ports,10 opto-isolated digital output ports;
6) 1 analog output port of 0-10V adjustable speed for spindle (can change to PWM output port);
7) ARM motion control chip;
8) Compatible with Standard MPG and also Digital Dream MPG
Accessories：
Beside the main products,in our package,there are accesories:1pcs 1.5meter USB cable.
2. Safety Notes:
Moving objets like machine tool axes and automatical equipments can be very dangerous.Always make
sure to keep all machines safety standards.Always install E-stop switches and the required safety equipments to
your control system and make sure that the equipment controlled by our device meets all the safety standards.
Always keep the controller dry and away from falling chips and dust,protect the device from taint
damage.Avoid conneciton mistakes,avoid high voltage damage,avoid operation errors.
Protect the device from direct intensive sunshine beams and from extreme temperature levels and from
extra high humidity weather.
We cannot take the responsibility for any persernal injury and financial loss caused by any device failure
or caused by following an error in this documentation.
Digital Dream Mach3 Motion Controller Page -1 UC300 User's Manual