The Detailed Definition Of Parameters; Define The Opening Page (Logo) - Digital Dream DM500 User Manual

5.8.4 Define the Opening Page (LOGO)

Operation:
• Pls save the opening photo at the "install" file which is at the root dictionary of the U-disk；
• Insert the U-disk and restart the controller；
• The system will search the logo file and load into the controller automatically.
Notice:
• The opening photo file's name should be logo.bmp;
• The Logo.bmp file size is 480*320 dpi;
• The parameter index no. 249 can define the logo display time.
5.9

The detailed definition of parameters

In next Pages,there are the parameter list.
The parameter file can be edited, but it needs to follow the definite standards, the standards are as
follows:
a、One line can only be edited one parameter.
b、The parameter format is #parameter mark= value. Among them, # must be the first character of each
line.# should closely be followed by the parameter mar and the following mark is=, and the make= will be
followed by the actual value.
c、After the parameter has assignment and equation, the part of parameter interpretation can have any
format without constraint.
d、Each parameter is regulated with assignment scope. Please do the assignment in strict accordance
with the assignment scope.
e、Each parameter is set with default value in advance. Please use the setting value of default parameter
under the situation of not understanding the actual function of this parameter.
Page -35
DM500 User's Manual