Spindle Speed Setting - Digital Dream DM500 User Manual

Operation:
• Click till SRO is highlighted;
• Everytime press
Notice:
It's recommended the rate is not more than 100%,if you want high speed you can change the F value.
5.5.3.5

Spindle Speed Setting

Conditions:
• Controller is in READY status;
• The screen go to "Main page"
Operation:
• Click till S is highlighted;
• As we used 3 output pins to define 8 spindle speeds.Here the S Value is from 1-8.For example if the
Max spindle speed is 24000RPM,and the S value is 3,then the spindle speed is 24000*3/8=9000RPM.
Press the key or
Press the Key
or to increase or decrease at 10% increments.
to change the value of S.
to Start or Stop Spindle
Page -30 DM500 User's Manual