Password Setting; Operation Permission Table; Modification Of The Password - Digital Dream DM500 User Manual

5.8.4 Password Setting

There are 4 operation rights of this system:Visitor,Operator,admin,super admin.
By default the password for them are:
Operator:666666
admin:777777
super admin:888888
5.8.4.1

Operation Permission Table

User
Operator Revise some parameter value,operation on machining.
Change password of the admin and operator,data recover,revise parameters.
Admin
Super Admin All above and installment payment
5.8.4.2

Modification of the password

Conditions:
• Controller is in READY status;
• The screen go to "Para page"
Operation:
• Press and
Pls note the window as below:
Permission
,type in the old password and new password,click "YES".
Password Setting
Page -36
Workers
Operator
Factory administrator
Machine Manufacturer
DM500 User's Manual