Installing The 2.5" Sata Device - AXIOMTEK eBOX671-885-FL Series User Manual

2.3

Installing the 2.5" SATA Device

Step 1 Turn off the system, and unplug the power cord.
Step 2 Turn the system upside down to locate screws at the bottom, loosen
screws.
Step 3 Remove the bottom cover.
Step 4 You can get the SATA data cable and the SATA power cable, please refer to
the following photos to place the SATA hard drive on bottom cover.
Please notice the direction of connector for HDD.
Step 5 Fasten screws to fix HDD with bottom cover.
Hardware Installation
eBOX671-885-FL Series User's Manual
17