Elnec JetProg User Manual page 79

a key <Space> as a separation character) and press <Enter>
or click OK button.
Press a key <Esc> or click Cancel button at any time to cancel
device selection without affecting the currently selected device.
Selected device is automatically saved to buffer of default
devices (max. 10 devices). This buffer is accessible with
Device / Select from default devices command.
If you wish display additional information about the current
device, use an <Ctrl+F1> key. This command provides a size
of device, organization, programming algorithm and a list of
programmers (including auxiliary modules) which supported
this device. You can find here a package information and other
general information about current device too.
Select device ... / Only selected type
This window allows selecting the desired type of the device. At
the first - you must select a device type (e.g. EPROM) and
device subtype (e.g. 64Kx8 (27512)), using mouse or cursor
keys. It will cause a list of manufacturers and devices will be
displayed.
Device can be select by double click on a line from list with
desired manufacturer name and device number or by entering
manufacturer name and/or device number in a search box (use
a key <Space> as a separation character) and press <Enter>
or click OK button.
Press a key <Esc> or click Cancel button at any time to cancel
device selection without affecting the currently selected device.
Selected device is automatically saved to buffer of default
devices (max. 10 devices). This buffer is accessible with
Device / Select from default devices command.
If you wish display additional information about the current
device, use an <Ctrl+F1> key. This command provides a size
of device, organization, programming algorithm and a list of
programmers (including auxiliary modules) which supported
this device. You can find here a package information and other
general information about current device too.
Select device ... / Only selected manufacturer
This window allows selecting the desired device type by
manufacturer.
Manufacturer box using mouse or cursor keys. It will cause a
list of selected manufacturer devices will be displayed.
Device can be select by double click on a line from list with
desired manufacturer name and device number or by entering
First select
79
a required manufacturer
Software
in