Elnec JetProg User Manual page 28

Programming speed
Note. These times strongly depend on PC speed, LPT port
type and operating system free resources. Therefore are given
values of two different PC configurations for comparison.
Device
27C010
AT29C040A
AM29F040
PIC16C67
Time A conditions:
Time B conditions:
SOFTWARE
• Algorithms:
algorithms are used. Custom algorithms are available at
additional cost.
• Algorithm updates: software updates are available approx.
every 2 weeks, free of charge.
• Main features: revision history, session logging, on-line help,
device and algorithm information
Device operations
• standard:
• intelligent device selection by device type, manufacturer or
typed fragment of part name
• automatic ID-based selection of EPROM/Flash EPROM
• blank check, read, verify
• program
• erase
• configuration and security bit program
• illegal bit test
• checksum
• security
• insertion test, reverse insertion check
• contact check
• ID byte check
• special
• production mode (automatic start immediately after device
insertion)
• auto device serial number increment
• statistic
• count-down mode
Operation
programming and verify
programming and verify
programming and verify
programming and verify
Pentium MMX, 250 MHz, ECP/EPP,
WIN98.
Athlon, 750 MHz, ECP/EPP on PCI
bus, WIN98.
only manufacturer
28
ELNEC s. r. o.
Time A
24 sec
38 sec
55 sec
18 sec
approved or
Time B
20 sec
28 sec
49 sec
16 sec
certified